chore(deps): update quickshell digest to e9bad67

dot_config/flake/home/fish.nix

@@ -1,18 +1,4 @@
-{pkgs, ...}: let
+{pkgs, ...}: {
-  catppuccin-fish = pkgs.fetchFromGitHub {
-    owner = "catppuccin";
-    repo = "fish";
-    rev = "6a85af2ff722ad0f9fbc8424ea0a5c454661dfed";
-    hash = "sha256-Oc0emnIUI4LV7QJLs4B2/FQtCFewRFVp7EDv8GawFsA=";
-  };
-
-  rose-pine = pkgs.fetchFromGitHub {
-    owner = "rose-pine";
-    repo = "fish";
-    rev = "main";
-    hash = "sha256-Dvaw1k7XOU2NUQbTJAXPgAOPN1zTLVrc7NZDY5/KHeM=";
-  };
-in {
   programs.fish = {
     enable = true;
     interactiveShellInit = ''
@@ -50,12 +36,4 @@ in {
       }
     ];
   };
-
-  xdg.configFile."fish/themes/Catppuccin Latte.theme".source = "${catppuccin-fish}/themes/Catppuccin Latte.theme";
-
-  xdg.configFile."fish/themes/Catppuccin Macchiato.theme".source = "${catppuccin-fish}/themes/Catppuccin Macchiato.theme";
-
-  xdg.configFile."fish/themes/Rosé Pine.theme".source = "${rose-pine}/themes/Rosé Pine.theme";
-
-  xdg.configFile."fish/themes/Rosé Pine Dawn.theme".source = "${rose-pine}/themes/Rosé Pine Dawn.theme";
 }

dot_config/flake/machines/saffron/configuration.nix

@@ -16,52 +16,13 @@
 
   # Use the GRUB 2 boot loader.
   boot.loader.systemd-boot.enable = true;
-  # boot.loader.grub.efiSupport = true;
-  # boot.loader.grub.efiInstallAsRemovable = true;
-  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
-  # Define on which hard drive you want to install Grub.
-  # boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
 
-  # networking.hostName = "nixos"; # Define your hostname.
+  services.tailscale.enable = true;
-  # Pick only one of the below networking options.
+
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.hostName = "saffron"; # Define your hostname.
-  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
 
   # Set your time zone.
-  # time.timeZone = "Europe/Amsterdam";
+  time.timeZone = "America/Toronto";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  # i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "us";
-  #   useXkbConfig = true; # use xkb.options in tty.
-  # };
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-
-  # Configure keymap in X11
-  # services.xserver.xkb.layout = "us";
-  # services.xserver.xkb.options = "eurosign:e,caps:escape";
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # services.pulseaudio.enable = true;
-  # OR
-  # services.pipewire = {
-  #   enable = true;
-  #   pulse.enable = true;
-  # };
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.libinput.enable = true;
 
   users.users.tyler = {
     isNormalUser = true;
@@ -71,55 +32,7 @@
   };
   programs.fish.enable = true;
 
-  # programs.firefox.enable = true;
+  services.openssh.enable = true;
 
-  # List packages installed in system profile.
-  # You can use https://search.nixos.org/ to find more packages (and options).
-  # environment.systemPackages = with pkgs; [
-  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-  #   wget
-  # ];
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  # services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
-  # to actually do that.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
-  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
-  # and migrated your data accordingly.
-  #
-  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
   system.stateVersion = "25.05"; # Did you read the comment?
 }

dot_config/flake/machines/saffron/hardware-configuration.nix

@@ -1,39 +1,12 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
+{modulesPath, ...}: {
-# and may be overwritten by future invocations.  Please make changes
+  imports = [(modulesPath + "/profiles/qemu-guest.nix")];
-# to /etc/nixos/configuration.nix instead.
+  boot.loader.grub.device = "/dev/vda";
-{
+  boot.initrd.availableKernelModules = ["ata_piix" "uhci_hcd" "xen_blkfront" "vmw_pvscsi"];
-  lib,
+  boot.initrd.kernelModules = ["nvme"];
-  modulesPath,
-  ...
-}: {
-  imports = [
-    (modulesPath + "/profiles/qemu-guest.nix")
-  ];
-
-  boot.initrd.availableKernelModules = ["ata_piix" "uhci_hcd" "virtio_pci" "sr_mod" "virtio_blk"];
-  boot.initrd.kernelModules = [];
-  boot.kernelModules = ["kvm-intel"];
-  boot.extraModulePackages = [];
-
   fileSystems."/" = {
-    device = "/dev/disk/by-uuid/50f54744-19c2-4119-8ff5-c64917c5e5d2";
+    device = "/dev/vda1";
     fsType = "ext4";
   };
-
+  swapDevices = [{device = "/dev/vdb";}];
-  fileSystems."/boot" = {
+  nixpkgs.hostPlatform = "x86_64-linux";
-    device = "/dev/disk/by-uuid/301D-B62F";
-    fsType = "vfat";
-    options = ["fmask=0077" "dmask=0077"];
-  };
-
-  swapDevices = [];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.ens3.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
 }