chore(deps): update actions/checkout action to v6

dot_config/flake/flake.lock

@@ -3,21 +3,23 @@
     "dankMaterialShell": {
       "inputs": {
         "dgop": "dgop",
+        "dms-cli": "dms-cli",
         "nixpkgs": [
           "nixpkgs-unstable"
-        ]
+        ],
+        "quickshell": "quickshell"
       },
       "locked": {
-        "lastModified": 1763560490,
+        "lastModified": 1760122870,
-        "narHash": "sha256-dLbiTWsKoF0if/Wqet/+L90ILdAaBqp+REGOou8uH3k=",
+        "narHash": "sha256-lGy9uHYY6iuUWRUg1g+qnjkqgxgtX5N6G4SFl1ESAZg=",
         "owner": "AvengeMedia",
         "repo": "DankMaterialShell",
-        "rev": "e39465aece2fd3414cbb82c7fc5fda1809de168e",
+        "rev": "cd488a8623e6a55185685e82d8362c003a7671a8",
         "type": "github"
       },
       "original": {
         "owner": "AvengeMedia",
-        "ref": "v0.6.2",
+        "ref": "v0.1.10",
         "repo": "DankMaterialShell",
         "type": "github"
       }
@@ -108,11 +110,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1762435535,
+        "lastModified": 1759769087,
-        "narHash": "sha256-QhzRn7pYN35IFpKjjxJAj3GPJECuC+VLhoGem3ezycc=",
+        "narHash": "sha256-b4dEAjvIfIkw2/C47aZGDnwhTBEjqptDo8J5PizeTCo=",
         "owner": "AvengeMedia",
         "repo": "dgop",
-        "rev": "6cf638dde818f9f8a2e26d0243179c43cb3458d7",
+        "rev": "ad6ad285e8b882c41eb8994ef7c91e151afb9a97",
         "type": "github"
       },
       "original": {
@@ -121,6 +123,27 @@
         "type": "github"
       }
     },
+    "dms-cli": {
+      "inputs": {
+        "nixpkgs": [
+          "dankMaterialShell",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1759982027,
+        "narHash": "sha256-4deRT98VwfZWZ685wIGevyYl3CzpuZJPjdjfulABH00=",
+        "owner": "AvengeMedia",
+        "repo": "danklinux",
+        "rev": "5cdfeeae2e14089079dcb0d6b61f014ce754021f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "AvengeMedia",
+        "repo": "danklinux",
+        "type": "github"
+      }
+    },
     "firefox-gnome-theme": {
       "flake": false,
       "locked": {
@@ -506,6 +529,27 @@
       }
     },
     "quickshell": {
+      "inputs": {
+        "nixpkgs": [
+          "dankMaterialShell",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1759610621,
+        "narHash": "sha256-P3UPFd95mS/3aNgy40nCXAmyfR2bEEBd+tX6xfkYFb0=",
+        "ref": "refs/heads/master",
+        "rev": "c5c438f1cd1a76660a8658ef929a3d19e968e2ce",
+        "revCount": 689,
+        "type": "git",
+        "url": "https://git.outfoxxed.me/quickshell/quickshell"
+      },
+      "original": {
+        "type": "git",
+        "url": "https://git.outfoxxed.me/quickshell/quickshell"
+      }
+    },
+    "quickshell_2": {
       "inputs": {
         "nixpkgs": [
           "nixpkgs-unstable"
@@ -539,7 +583,7 @@
         "nixpkgs": "nixpkgs_4",
         "nixpkgs-unstable": "nixpkgs-unstable",
         "noctalia": "noctalia",
-        "quickshell": "quickshell"
+        "quickshell": "quickshell_2"
       }
     },
     "systems": {

dot_config/flake/flake.nix

@@ -89,7 +89,7 @@
   in {
     overlays = import ./overlays {inherit inputs;};
 
-    # defaultPackage = forAllSystems (system: home-manager.defaultPackage.${system});
+    defaultPackage = forAllSystems (system: home-manager.defaultPackage.${system});
 
     nixosConfigurations = {
       kaylee = nixpkgs.lib.nixosSystem {
@@ -145,24 +145,6 @@
           }
         ];
       };
-
-      saffron = nixpkgs.lib.nixosSystem {
-        specialArgs = {inherit inputs outputs;};
-        modules = [
-          determinate.nixosModules.default
-          ./machines/saffron/configuration.nix
-
-          home-manager.nixosModules.home-manager
-          {
-            home-manager.useGlobalPkgs = true;
-            home-manager.useUserPackages = true;
-
-            home-manager.backupFileExtension = "bak";
-            home-manager.extraSpecialArgs = {inherit inputs outputs nixosModules homeModules darwinModules;};
-            home-manager.users.tyler = import ./machines/saffron/home.nix;
-          }
-        ];
-      };
     };
 
     darwinConfigurations."MacBook-Pro" = darwin.lib.darwinSystem {
@@ -188,5 +170,13 @@
         }
       ];
     };
+
+    homeConfigurations = {
+      "tyler@guidebolt" = home-manager.lib.homeManagerConfiguration {
+        pkgs = allPkgs."x86_64-linux";
+        extraSpecialArgs = {inherit inputs outputs;};
+        modules = [./home/guidebolt/guidebolt.nix];
+      };
+    };
   };
 }

dot_config/flake/home/niri.nix

@@ -18,8 +18,6 @@
     xdg-desktop-portal-gtk
     gnome-keyring
 
-    eog
-
     upower
 
     mods.xwayland-satellite

dot_config/flake/machines/kaylee/hardware-configuration.nix

@@ -1,36 +1,32 @@
 # Do not modify this file!  It was generated by ‘nixos-generate-config’
 # and may be overwritten by future invocations.  Please make changes
 # to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
 {
-  config,
+  imports =
-  lib,
+    [ (modulesPath + "/installer/scan/not-detected.nix")
-  pkgs,
+    ];
-  modulesPath,
-  ...
-}: {
-  imports = [
-    (modulesPath + "/installer/scan/not-detected.nix")
-  ];
 
-  boot.initrd.availableKernelModules = ["ehci_pci" "nvme" "xhci_pci" "usbhid" "usb_storage" "sd_mod" "sr_mod"];
+  boot.initrd.availableKernelModules = [ "ehci_pci" "nvme" "xhci_pci" "usbhid" "usb_storage" "sd_mod" "sr_mod" ];
-  boot.initrd.kernelModules = [];
+  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = ["kvm-amd"];
+  boot.kernelModules = [ "kvm-amd" ];
-  boot.extraModulePackages = [];
+  boot.extraModulePackages = [ ];
 
-  fileSystems."/" = {
+  fileSystems."/" =
-    device = "/dev/disk/by-uuid/093a88f0-7ec2-4672-b7bb-bb7f62df99ca";
+    { device = "/dev/disk/by-uuid/093a88f0-7ec2-4672-b7bb-bb7f62df99ca";
-    fsType = "ext4";
+      fsType = "ext4";
-  };
+    };
 
-  fileSystems."/boot" = {
+  fileSystems."/boot" =
-    device = "/dev/disk/by-uuid/161E-9FB2";
+    { device = "/dev/disk/by-uuid/161E-9FB2";
-    fsType = "vfat";
+      fsType = "vfat";
-    options = ["fmask=0077" "dmask=0077"];
+      options = [ "fmask=0077" "dmask=0077" ];
-  };
+    };
 
-  swapDevices = [
+  swapDevices =
-    {device = "/dev/disk/by-uuid/b150b63b-c446-4134-a444-e789318b9546";}
+    [ { device = "/dev/disk/by-uuid/b150b63b-c446-4134-a444-e789318b9546"; }
-  ];
+    ];
 
   # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
   # (the default) this is the recommended approach. When using systemd-networkd it's

dot_config/flake/machines/saffron/configuration.nix

@@ -1,125 +0,0 @@
-{pkgs, outputs, ...}: {
-  imports = [
-    # Include the results of the hardware scan.
-    ./hardware-configuration.nix
-  ];
-
-  nixpkgs = {
-    overlays = builtins.attrValues outputs.overlays;
-
-    config = {
-      allowUnfree = true;
-      permittedInsecurePackages = [
-      ];
-    };
-  };
-
-  # Use the GRUB 2 boot loader.
-  boot.loader.systemd-boot.enable = true;
-  # boot.loader.grub.efiSupport = true;
-  # boot.loader.grub.efiInstallAsRemovable = true;
-  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
-  # Define on which hard drive you want to install Grub.
-  # boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
-
-  # networking.hostName = "nixos"; # Define your hostname.
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  # time.timeZone = "Europe/Amsterdam";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  # i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "us";
-  #   useXkbConfig = true; # use xkb.options in tty.
-  # };
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-
-  # Configure keymap in X11
-  # services.xserver.xkb.layout = "us";
-  # services.xserver.xkb.options = "eurosign:e,caps:escape";
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # services.pulseaudio.enable = true;
-  # OR
-  # services.pipewire = {
-  #   enable = true;
-  #   pulse.enable = true;
-  # };
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.libinput.enable = true;
-
-  users.users.tyler = {
-    isNormalUser = true;
-    description = "tyler";
-    extraGroups = ["wheel"];
-    shell = pkgs.fish;
-  };
-  programs.fish.enable = true;
-
-  # programs.firefox.enable = true;
-
-  # List packages installed in system profile.
-  # You can use https://search.nixos.org/ to find more packages (and options).
-  # environment.systemPackages = with pkgs; [
-  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-  #   wget
-  # ];
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  # services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
-  # to actually do that.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
-  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
-  # and migrated your data accordingly.
-  #
-  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
-  system.stateVersion = "25.05"; # Did you read the comment?
-}

dot_config/flake/machines/saffron/hardware-configuration.nix

@@ -1,39 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{
-  lib,
-  modulesPath,
-  ...
-}: {
-  imports = [
-    (modulesPath + "/profiles/qemu-guest.nix")
-  ];
-
-  boot.initrd.availableKernelModules = ["ata_piix" "uhci_hcd" "virtio_pci" "sr_mod" "virtio_blk"];
-  boot.initrd.kernelModules = [];
-  boot.kernelModules = ["kvm-intel"];
-  boot.extraModulePackages = [];
-
-  fileSystems."/" = {
-    device = "/dev/disk/by-uuid/50f54744-19c2-4119-8ff5-c64917c5e5d2";
-    fsType = "ext4";
-  };
-
-  fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/301D-B62F";
-    fsType = "vfat";
-    options = ["fmask=0077" "dmask=0077"];
-  };
-
-  swapDevices = [];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.ens3.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-}

dot_config/flake/machines/saffron/home.nix

@@ -1,16 +0,0 @@
-{lib, ...}: {
-  imports = [
-    ../../home/common.nix
-    ../../home/helide
-  ];
-
-  home = {
-    username = "tyler";
-    homeDirectory = lib.mkForce "/home/tyler";
-
-    packages = [
-    ];
-
-    stateVersion = "23.11";
-  };
-}

dot_config/flake/machines/wash/configuration.nix

@@ -175,8 +175,6 @@
 
   programs.steam.enable = true;
 
-  programs.thunderbird.enable = true;
-
   programs.appimage = {
     enable = true;
     binfmt = true;