saffron nixos

dot_config/flake/machines/saffron/configuration.nix

@@ -0,0 +1,116 @@
+{...}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];
+
+  # Use the GRUB 2 boot loader.
+  boot.loader.systemd-boot.enable = true;
+  # boot.loader.grub.efiSupport = true;
+  # boot.loader.grub.efiInstallAsRemovable = true;
+  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
+  # Define on which hard drive you want to install Grub.
+  # boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
+
+  # networking.hostName = "nixos"; # Define your hostname.
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Set your time zone.
+  # time.timeZone = "Europe/Amsterdam";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # services.pulseaudio.enable = true;
+  # OR
+  # services.pipewire = {
+  #   enable = true;
+  #   pulse.enable = true;
+  # };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  # users.users.alice = {
+  #   isNormalUser = true;
+  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+  #   packages = with pkgs; [
+  #     tree
+  #   ];
+  # };
+
+  # programs.firefox.enable = true;
+
+  # List packages installed in system profile.
+  # You can use https://search.nixos.org/ to find more packages (and options).
+  # environment.systemPackages = with pkgs; [
+  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #   wget
+  # ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  # services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "25.05"; # Did you read the comment?
+}

dot_config/flake/machines/saffron/hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  lib,
+  modulesPath,
+  ...
+}: {
+  imports = [
+    (modulesPath + "/profiles/qemu-guest.nix")
+  ];
+
+  boot.initrd.availableKernelModules = ["ata_piix" "uhci_hcd" "virtio_pci" "sr_mod" "virtio_blk"];
+  boot.initrd.kernelModules = [];
+  boot.kernelModules = ["kvm-intel"];
+  boot.extraModulePackages = [];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/50f54744-19c2-4119-8ff5-c64917c5e5d2";
+    fsType = "ext4";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/301D-B62F";
+    fsType = "vfat";
+    options = ["fmask=0077" "dmask=0077"];
+  };
+
+  swapDevices = [];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens3.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

dot_config/flake/machines/saffron/home.nix

@@ -1,13 +1,10 @@
-{outputs, ...}: {
+{...}: {
   imports = [
     ../../home/common.nix
     ../../home/helide
   ];
 
-  overlays = builtins.attrValues outputs.overlays;
-
   home = {
-
     username = "tyler";
     homeDirectory = "/home/tyler";